Nortec Industries Humidifier Pressure Steam Humidifier User Manual

Live  
®
Steam  
Pressure  
Steam  
Humidifiers  
Designed to deliver  
reliable humidity from  
facility steam boilers.  
 
operating advantages  
Steam Injection  
NORTEC LiveSteam delivers precise humidity  
control. Utilizing tried and true components and  
304 stainless steel tubing, LiveSteam is the  
dependable steam injection system for your  
facility.  
DISPERSED STEAM  
DISPERSED STEAM  
LiveSteam distributors are available in a wide  
variety of lengths ranging from 1ꢀ" to 144" to  
suit your exact duct size for the best possible  
steam dispersion. Multi-tube units are also  
available.  
STEAM  
CONDENSATE  
Steam Exchange  
Precise Control  
On NORTEC SE Series Steam Exchange  
In facilities with existing steam boilers LS and SE  
Series offer a cost effective way to add precise  
humidity control. With a wide variety of control  
options and unit capacities NORTEC LS and SE  
Series are ideal for job engineered systems.  
humidifiers, the boiler steam passes through  
the SE internal heat exchanger(s) bringing the  
surrounding water in the tank to atmospheric clean  
steam vapor. The chemical treatment from the  
boiler does not enter the air steam.  
The SE Series heat exchanger utilizes 316  
stainless steel and is designed to give maximum  
output while taking up minimal space. It is easy to  
remove for cleaning and the flat smooth surfaces  
help reduce maintenance time.  
3
 
technology  
LiveSteam mounted  
with a SAM-e manifold  
for short absorption  
distance applications  
Live  
®
Steam  
Steam  
Injection  
Humidifiers  
8
5
Available for single or  
multiple tube applications  
1
10  
9
7
3
Pressure ranges from  
ꢀ-50 PSIG  
High capacity system  
(up 3ꢀ09 lbs/hr)  
2
4
Economical and cost effective  
system to meet high humidity  
requirements  
6
Delivers precise humidity  
control  
1
Steam inlet, strainer upstream to  
remove impurities.  
7
8
Steam control valve meters  
steam entering dispersion tube.  
Steam jacketed dispersion  
tubes to prevent wetting  
2
3
Steam jacketed dispersion tube.  
Electric on/off and electric  
modulating actuators standard.  
Pneumatic valve actuator optional.  
Tube support bracket, ensures  
proper unit installation.  
Support brackets on tubes  
over ꢀ feet in length  
9
Tube adaptor connecting valve to  
dispersion tube. Factory installed  
silencers are available.  
4
5
Interconnecting pipes between  
dispersion tube and separator.  
Available for regular or purified  
boiler steam  
Steam separator ensures only  
condensate-free steam is  
discharged into the air stream.  
10 Steam outlet orifices sized for  
Available for pneumatic or  
electric controls  
exact humidity output.  
6
Condensate outlet to steam trap  
for recirculation to boiler for  
energy efficient operation.  
4
 
SE Series Features Comparison  
Steam capacity adjustment  
Full size alphanumeric display and keypad  
Configurable date and time indication  
Transducer signal acceptance  
Individual component diagnostic capability  
Keypad set-point adjustment (humidity)  
Display of relative humidity  
Low and high relative humidity alarms  
Keep warm feature  
SE  
Networking capability up to 10 units  
Pre-cleaning sequence  
Series  
Troubleshooting Guide  
Steam  
Exchange  
Humidifiers  
Self diagnostic capabilities  
Fault history  
Smart drain water cooling  
Single or Dual modulation signal acceptance  
Time to next maintenance alarm  
System demand indication  
Backlit display  
Built-in Float & Thermostatic steam trap(s)  
3-day drain with no call for humidity  
Full tank blow down capability via time of  
day, timer, or signal from BMS  
Remote fault indication  
Industry standard modulation signal acceptance  
Internal Drain water cooler  
Blow down based on steam production  
Precise five level water level indication  
Status indicator lamps  
SETC 100  
Single or multiple steam outlet options  
Large Side tank cleaning port  
Top access cleaning  
Capacity up to 1050 lbs/hr  
NORTEC Total Controller  
Built-in P-trap  
Fully insulated tank for  
efficient operation  
Single water connection  
Fully modulating down to 25% of total capacity  
Options  
Intuitive scale management  
based on steam production  
Pre-cleaning sequence  
ensures shorter  
maintenance time  
All components suitable for  
RO or DI water  
Interaction with BMS system (Contact Factory)  
Freeze protection  
Building management  
system compatible  
Internal water tempering for  
drain water cooling  
Floor stand  
Distribution Systems  
Network up to 10 units  
Fully modulating  
SAM-e  
Small SE 50 lbs/hr for easy  
ceiling mounting  
Steam distributor  
Built-in float and  
thermostatic steam trap(s)  
Blower pack  
5
 
options  
Steam Distributor  
Systems  
Nortec offers flexible steam distribution choices  
to satisfy a wide range of requirements:  
Atmospheric steam distributor  
• Stainless Steel Steam Distributors to  
distribute atmospheric steam into ducts.  
• Independant Blower Packs for in space  
applications (remote mounted).  
SAM-e Short Absorption Manifold for use  
in air handlers or ducts where short steam  
absorption distance is critical.  
Blower pack  
SAM-e Short Absorption Manifold  
NORTEC LINKS  
NORTEC Links offers monitoring and control  
allowing humidifier(s) to communicate to your  
Building Management System (BMS). The  
controller is factory installed and is located  
internally to the humidifier. Simply specify at time  
of order what operating protocol you are using –  
BACnet IP, BACnet MSTP, LonWorks, Modbus or  
Jonhson Nꢀ.  
NORTEC OnLine  
NORTEC OnLine is a remote interactive  
communication package that allows satellite  
contacts to monitor, maintain and control  
a humidification center from any location  
worldwide using standard internet connections.  
This advanced software shows graphic  
representations of the humidifier and its key  
parameters (up to 75 functions).  
Customer  
Communication through the internet or email.  
NORTEC Humidifier  
NORTEC Technical Services  
6
 
technical data  
LiveSteam  
MODEL 200  
MODEL LS1  
MODEL 300  
MODEL LS2  
MODEL 450  
MODEL LS3  
MODEL 600  
MODEL LS3  
MODEL 800  
MODEL LS3  
SaM-e  
mini SaM-e  
SPECIFICaTION  
Pressure range - psig (kPa)  
2-50 (14-345)  
284 (129)  
374 (170)  
2-50 (14-345)  
571 (259)  
653 (297)  
8.8" x 6"  
2-50 (14-345)  
916 (417)  
2-50 (14-345)  
1258 (572)  
1664 (757)  
11.2" x 9"  
2-50 (14-345)  
2-50 (14-345)  
N/A  
Max. capacity single tube - lbs/hr (kg/hr)  
Max. capacity multi-tube - lbs/hr (kg/hr)  
N/A  
1030 (468)  
10.5" x 6"  
3209 (1456)  
12.6" x 9"  
3200 (1451.5)  
Separator physical data -  
Height x Diameter  
7.7" x 6"  
Custom  
195mm x 152mm 223mm x 152mm 268mm x 152mm 284mm x 229mm 322mm x 229mm  
Standard actuator  
Electric Modulating 0-10 VDC, 24 VAC  
Float & Thermostatic  
Standard steam trap  
Separator and dispersion tube material  
OPTIONS:  
Stainless Steel 304  
Pneumatic actuator  
Electric on/off actuator  
Tube insulation  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
no  
yes  
yes  
yes  
no  
yes  
yes  
yes  
no  
yes  
yes  
no  
DI water installation  
yes  
SE Series  
SPECIFICaTION  
SE 50  
SE 100  
SE 175  
SE 250  
SE 375  
SE 475  
SE 675  
SE 950 SE 1050  
Pressure range - psig (kPa)  
5-15 (35-105)  
17-50  
(8-23)  
5-100  
(2-45)  
7-175  
(3-79)  
11-250  
(5-114)  
15-375  
(7-170)  
24-475  
(11-215)  
30-675  
(14-306)  
58-950  
(26-430)  
67-1050  
(30-476)  
Max. capacity single tube - lbs/hr (kg/hr)  
25.6" x 20.6"  
x 18.4"  
Physical data -  
46.4" x 32.0"x 20.0"  
46.4" x 32.0"x 26.4"  
46.4" x 32.0"x 42.0"  
46.4" x 32.0"x 58.0"  
65.1cm x 52.4cm 117.8cm x 81.4cm x 50.8cm 117.8cm x 81.4cm x 67.1cm 117.8cm x 81.4cm x 106.7cm 117.8cm x 81.4cm x 147.3cm  
x 46.7cm  
Width x Height x Depth  
Standard actuator  
Built-in steam trap  
Insulation & Cabinetry  
Voltage/Phase  
Electric Modulating 0-10 VDC, 24 VAC  
Float & Thermostatic  
Standard  
110-120/1  
2.1  
Full load amps  
Internal Smart Drain Water Cooler  
Steam Outlets (s) - OD  
OPTIONS:  
Standard  
1 x 1.75" (1 x 4.44cm)  
1 x 3" (1 x 7.62cm)  
1 x 4" (1 x 10.16cm)  
2 x 4" (2 x 10.16cm)  
NORTEC Links BMS  
NORTEC OnLine  
Keep Warm Feature  
Freeze Protection  
Outdoor Model  
Floor Stand  
BACnet, LonWorks, Johnson Control N2 Bus or Modbus (SETC model only)  
SETC model only  
no  
no  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
no  
yes  
7
 
U.S.a.  
AxAir Nortec Inc.  
8ꢀ6 Proctor Avenue  
Ogdensburg, NY 13669  
CaNaDa  
AxAir Nortec Ltd.  
ꢀ740 Fenton Road  
Ottawa, Ontario K1T 3T7  
TEL: 1.866.NORTEC1  
FAx: 613.8ꢀꢀ.7964  
Certificate No. 002419  
electric steam — atomizing nozzles — high pressure nozzles — steam injection — steam exchange — gas steam  
Form 07-ꢀꢀ4  
Printed in Canada  
Printed on Recycled Paper  
 

Miele Cooktop CS 1011 User Manual
Miller Electric Welder and DS 74DX16 User Manual
Mr Heater Fan MH42T User Manual
Murray Lawn Mower 309001x18A User Manual
Nextar Digital Photo Frame N7 208 User Manual
Niles Audio Speaker RS5 Sandstone User Manual
Nilfisk ALTO Vacuum Cleaner GD 2000 Series User Manual
Omron Building Set HN289 User Manual
Panasonic Network Card 2SB1320A User Manual
Panasonic Smoke Alarm 6367 User Manual