New Holland Lawn Mower 790 User Manual

New Holland  
Pull-Type Forage Harvester Specifications  
790 FP230 FP240  
MODEL  
790  
FP230  
FP240  
Weight (single axle), lbs. (kg)  
Length, ft. in. (m)  
3104 (1411)  
16’ 1-1⁄4” (4.98)  
10’ 6” (3.2)  
9’ 6” (2.79)  
4500 (2040)  
4700 (2130)  
................................................................21’ 6” (6.5) ................................................................  
.....................................................................11’ 2”.....................................................................  
................................................................10’ 8” (3.3) ................................................................  
Height with standard spout, ft. in. (m)  
Width, ft. in. (m)  
Number/type of knives..........................................................................................................12 single-edge hardened alloy ......................................................................................  
Cutterhead, type/speed ..................................................................................................................Cylinder, 850 rpm ..............................................................................................  
Cutterhead, diameter, in. (mm)  
Throat opening, in. (mm)  
19-5⁄16 (490.5)  
19 x 4-5⁄8 (482 x 117)  
.................................................................21 (533.4).................................................................  
22 x 6-5⁄8 (558.8 x 167.7) 24-3⁄8 x 6-5⁄8 (619.76 x 167.6)  
Shearbar ..............................................................................................Quick adjust, reversible, hard-faced on vertical and horizontal surfaces......................................................  
Length of cut, in. (mm)*  
Blower speed  
Recommended max. tractor hp  
Minimum power required  
Knife sharpener  
Recutter screens (non processor units)  
Vertical wheel adjustment, in. (mm)  
Tire sizes, single axle  
1⁄8 to 1-1⁄2 (3.2 to 38.1)  
1000 or 750 rpm  
150 PTO hp  
....................................................3⁄16 to 7⁄16* (4.8 to 11.1) ....................................................  
..................................................................1000 rpm..................................................................  
225 PTO hp  
150 PTO hp  
300 hp  
180 PTO hp  
75 PTO hp  
2” manual, built-in  
5 sizes available  
4-1⁄2 (114)  
...........................................................3” manual, built-in...........................................................  
.............................................................6 sizes available.............................................................  
....................................................................6 (152)....................................................................  
11Lx14 6PR standard  
31x13.5-156PR optional  
N/A  
31x13.5-158PR standard  
14Lx16.1 8PR optional  
11Lx15-156PR  
14Lx16.1 8PR standard  
Tire sizes, tandem axle  
11Lx15-15 6PR  
*Longer lengths of cut can be obtained by removing knives—up to 1-5⁄16” length of cut with only four knives.  
Optional CropPro™ Crop Processor  
Construction  
Not available  
...................................................................Optional...................................................................  
...............................................Hardened ductile iron, steel shaft...............................................  
Weight, lbs. (kg)  
490 (218)  
520 (231)  
Roll width, in. (mm)  
Roll diameter, in. (mm)  
Roll gap, in. (mm)  
Roll speed  
24-1/2 (622.3)  
26-7⁄8 (682.6)  
.................................................................7-7⁄8 (200).................................................................  
......................................................3⁄16 to 5⁄8 (4.8 to 15.9) ......................................................  
............................................................2650 rpm upper ............................................................  
.............................................................2250 rpm lower.............................................................  
Page 1of 2  
 

Miele Washer 2819i User Manual
Miller Electric Welder GA 16C User Manual
NAD DVD Player T 514DVD User Manual
Netopia Network Router D3100 I IDSL User Manual
Nilfisk ALTO Pressure Washer C 1102 X TRA User Manual
Omega Engineering Marine Sanitation System FLR5000 series User Manual
Oreck Sander LB8005 User Manual
Oregon Scientific Thermometer EMR899HGN User Manual
Orion Car Audio Car Stereo System XTREME 6004 User Manual
Panasonic Laptop CF 31 SERIES User Manual